Spin Pro Drill How to Use

  1. Charge Fully Before Use – Connect the USB-C cable and charge for about 2.5 hours until the battery is full.
  2. Insert Drill Bit – Twist the chuck to unlock, insert your chosen 3/32” bit, and twist back to secure it tightly.
  3. Power On & Adjust Speed – Press the power button and use the digital controls to set your desired speed (up to 30,000 RPM).
  4. Select Rotation Mode – Choose forward or reverse rotation depending on whether you are left- or right-handed and the task at hand.
  5. Perform Nail Work – Gently file, shape, buff, or smooth nails using steady motions without applying excessive pressure.
  6. Monitor LCD Display – Keep an eye on speed settings and battery status to ensure safe and consistent operation.
  7. Switch Off After Use – Power down the drill and unlock the chuck to remove the bit safely.
  8. Clean & Store – Wipe the unit with a soft cloth, disinfect bits separately, and store in a clean, dry pouch or case.